Heavy Duty Corrosion Guard 11 OZ (312g)

Quicksilver Corrosion Guard Rust Inhibitor for use on sterndrive, inboard and outboard engines. Fast-drying and high gloss, product contains a can of 11 OZ (312 Grams)

Corrosion Guard is a rust inhibitor that forms a water resistant barrier on non-painted and painted surfaces, can also be used to prevent further paint damage in areas where undercutting and blistering have occurred.

Usage:

• Remove all dirt, wax grease, saltwater deposits and other contaminants with a high quality cleaner. Rinse with water and allow the area to dry
• Shake can strong for a minute after the mixing ball begins to rattle. During use, shake several times
• Hold can upright 8 to 10 inches from surfaces and apply thin, even coats using a steady uniform, back and forth motion. Keep the can in motion while spraying. Release button after each stroke. Dries to the touch in 20 minutes, to handle in 1 hour and fully dry in 24 hours.
• Re-apply before storing your boat and every week if boating in salt water areas.